STEP 1 (Fig.1)

a) Loosen the glass base of the light kit by gently tapping around the edge of it.

b) To remove the glass, twist the glass base of the light kit anticlockwise.

STEP 2 (Fig.2)

CAUTION: Globe may be HOT!
(Always let the globe cool down before you attempt to remove it).

a) Use a tissue to hold the halogen globe. Push the globe to one side of the spring loaded prongs to remove the globe. As shown in the image on the left.

STEP 3 (Fig.3)

a) Refit a new globe. This time with a tissue hold the new globe and insert it into the metal prongs. Ensure the globe is secured firmly, if the globes appears to be loose, push the ends of the metal prongs towards each other until the globe is secured.

b) Now put the glass base back on, tighten the glass by slowly and gently turning it clockwise, do not over tighten the glass as you may find it very hard to remove next time.