|
TYPHOON
(Metal)
Hunter Pacific currently has one industrial ceiling fan and that is the
Typhoon Metal. The Typhoon Metal is a full metal fan, by this we mean
all parts of the fan are made of metal including the blades. The double
step pitch of the blades combined with its large motor allows the
Typhoon Metal to circulate optimum volumes of airflow with each spin.
Installing
Location
Typhoon Metal ceiling fans should only be installed with inside the
home. It is recommended that if you are installing in outdoor or
coastal areas that you use a Typhoon 316 ceiling fan.
Motor
Housing
The motor housing of the Typhoon Metal is made from pressed steel. This
ensures a long life expectancy from the product. There are a variety of
painted and plated finishes available in the Typhoon Metal range to
ensure there is a colour to suit your specific needs.
Motor
The Typhoon Metal 1220mm (48") and 1320mm (52")
ceiling fans have a 16 pole, 188mm x15mm motor,
while the 1420mm (56") ceiling fan has a 16
pole 188mm x 25mm motor. All Hunter Pacific
fan motors use vacuum impregnated high-grade
copper windings, silicon-steel stators and sealed
bearings for long life and quiet operation.
The wall controller in conjunction with the
stator windings ensures optimum speeds for all
conditions. With minimal motor movement and
a cool operational temperature, this powerful
motor is guaranteed lasting operation.
Blade Material
The blades of the Typhoon Metal are made from steel. These are finished
using the same process as the motors. There are over 300 processes that
the blades must go through to ensure a quality lasting finish. The
blade has an angled trailing edge to ensure that maximum air volume is
moved by the blade.
Blade
Pitch
The Typhoon ceiling fan has a genuine 22 degree pitch on the blade. The
angle consists of 2 parts, the 17 degree on the blade and a further 5
degree on the trailing edge to increase the volume of air moved by the
product.
Accessories
Remote
Down rods (21mm)
45 degree ceiling canopy kits
Light Kits (can attach all light kits in the accessory lights list with
the exception of the Icon,
Concept 2 and Aurora Alternatives 2 Accessory light kits).
Hunter
Pacific has designed these accessory components to simplify the
installation of our ceiling fans in tricky locations. Please see the
accessories section for more information.
If the
distance between the ceiling fan and the floor is greater than 2.4m
(8ft), please see the accessories section for solutions to solve these
problems.
|
