TYPHOON 316 (Stainless Steel)
The Typhoon 316 is a stainless steel fan. By this we mean most components of the fan are made of stainless steel. The double step pitch of the blades combined with its large motor enables the Typhoon 316 to circulate optimum volumes of airflow with each spin.

Installing Location
The Typhoon 316 can be used both indoors and outdoors to allow continuity between living areas.

Motor Housing
The Typhoon 316 is made from 316 grade stainless steel. This is also known as Marine grade stainless steel as it is often used in boat fittings or architectural panelling, railings and trim in coastal areas. The properties associated with this high grade stainless steel reduce the opportunity for pitting and corrosion on the finished products.

Motor
The Typhoon 316, 1220mm (48") and the 1320mm (52") ceiling fans have a 16 pole, 188mm x15mm motor, where as the 1420mm (56") has a 16 pole 188mm x 25mm motor. All Hunter Pacific fan motors use vacuum impregnated high-grade copper windings, silicon-steel stators and sealed bearings for long life and quiet operation. The wall controller in conjunction with the stator windings ensures optimum speeds for all conditions. With minimal motor movement and a cool operational temperature, this powerful motor is guaranteed lasting operation.

Blade Material
The blades are made from 316 grade stainless steel. The properties associated with this high grade stainless steel reduce the opportunity for pitting and corrosion on the finished products.

Blade Pitch
The Typhoon 316 ceiling fan has a genuine 22 degree pitch on the blade. The angle consists of 2 parts, the 17 degree on the primary blade and a further 5 degree on the trailing edge to increase the volume of air moved by the product.

Accessories
Remote
Down rods (21mm)
45 degree ceiling canopy kits
Light Kits (has its own stainless steel eclipse light fitting)

Hunter Pacific has designed these accessory components to simplify the installation of the ceiling fan range into tricky locations. Please see the accessories section for more information.

If the distance between the ceiling fan and the floor is greater than 2.4m (8ft), please see the accessories section for solutions to solve these problems.